The exact execution depends on table type, size, construction, condition, location and desired outcome. You do not need to know the technical solution yourself. Describe your concern and upload informative photos.
Poolplayer structures the request so suitable providers can better estimate the effort and prepare a transparent quote.
01
Service area
installation und Aufbau
Precise installation for consistently correct playing behaviour.
New, warehoused or already disassembled pool tables are fully assembled at the designated location and handed over ready for play. Crucial are a stable substructure, correctly fitted slate beds and exact levelling.
Typical procedure
1Inspection of access, installation area, floor and space requirements
2Assembly and inspection of the substructure
3Fitting, joining and levelling the slate sections
4Fitting of cloth, cushions, pockets and accessories
5Final inspection including run, height and functional checks
Typical scope of services
Assembly according to manufacturer specifications
Levelling and fine adjustment
Play-ready handover
Care and room climate instructions
Important: Before installation, the transport route, door widths, stairways and the final table position must be clarified.
Secure dismantling, protected transport and precise reassembly.
A pool table is not transported as a single piece of furniture. It is professionally dismantled, documented, protected and moved using suitable lifting and transport equipment. At the destination, it is fully reassembled.
Typical procedure
1Planning of route, access points, helpers and vehicle size
2Labelling and documented dismantling of all components
3Protection of slate, frame, cushions and surfaces
4Transport using a trolley, carrying aids and transport securing
5Reassembly, levelling and final play testing
Typical scope of services
Professional dismantling and reassembly
Protective materials and transport securing
Coordination of special access requirements
Readjustment at the destination
Important: Slate beds are heavy and fragile. Stairs, narrow passages or lack of lifts must be declared in advance.
Smooth re-cover with appropriate cloth quality and clean tensioning.
The cloth affects speed, control, durability and appearance. Before re-covering the playing surface is inspected and prepared. The new cloth is then applied evenly and without tension.
Typical procedure
1Selection of cloth type, quality, colour and playing characteristics
2Removal of the old cloth and cleaning of the playing surface
3Inspection of seams, unevenness and slate surface
4Even cutting and professional stretching
5Check of roll behaviour, rails and pocket areas
Typical scope of services
Advice on cloth qualities
Dismantling and disposal by arrangement
Re-covering the playing surface
Final inspection
Important: Pool, snooker and carom cloths differ significantly. Table type and desired playing behaviour must match the cloth selection.
Clean edges, even tension and precise pocket areas.
Rail refurbishment requires exact tensioning, neat transitions and properly finished pocket openings. The cushions are removed, inspected and re-covered with the appropriate cloth.
Typical procedure
1Dismantling and labelling of the rails
2Removal of the old covering and inspection of components
3Preparation of wood, rubber, edges and pocket areas
4Precise cutting and even re-covering
5Assembly and check of appearance and ball reaction
Typical scope of services
Rail dismantling
Preparation and re-covering
Neat pocket and corner finishing
Installation and functional testing
Important: For hardened or damaged cushions, a new cloth alone is not sufficient. In this case, a replacement is additionally recommended.
Even rebound through correct profiles and proper bonding.
Hardened, detached or incorrect cushion rubbers cause slow and uneven responses. Profile, height, angle and bonding are checked and renewed to suit the table system.
Typical procedure
1Analysis of rebound, profile, height and existing bonding
2Selection of a suitable pool, snooker or carom profile
3Removal of old rubbers and adhesive residue
4Adjustment, bonding and controlled curing
5Refelting and play-technical final inspection
Typical scope of services
Profile and condition inspection
Material selection
Replacement and gluing
Cushion cloth and final inspection
Important: K55, K66, K79 and snooker profiles are not freely interchangeable. Selection depends on the table's construction and geometry.
Custom solutions for damage, retrofitting and special requirements.
Not every issue fits a standard category. Repairs, readjustments, accessory installation and bespoke modifications are assessed based on photos and a detailed description.
Typical procedure
1Photo-based preliminary inspection and narrowing down of the problem
2Assessment of components, need for replacement and repair feasibility
3Agreement on materials, effort and desired outcome
4Execution of the repair or retrofit
5Functional testing and documentation of the result
Typical scope of services
Pockets, fittings and wooden parts
Leveling and readjustment
Lamps, covers and accessories
Custom special solutions
Important: Clear photos from multiple angles help realistically assess the effort and required replacement parts before the appointment.
The process is deliberately simple. No technical knowledge is required.
01
Select request
Specify service, table type, size and quantity.
02
Details and photos
Add location, access, condition and images.
03
Compare quotes
Agree on scope of work, terms and appointment.
04
Perform service
Choose a provider and coordinate the job contractually.
Good preparation
Providing these details makes quotes more accurate
The more complete the request, the more reliably effort, materials, travel and scheduling can be estimated.
Table type: Pool, Snooker or Carom
Size, manufacturer and model, if known
Number of tables and required service
Location, floor, stairs, lift and parking availability
Photos of the entire table, the nameplate and the affected areas
Preferred date and special conditions
Frequently asked questions
Important answers before you send your request
Do I need to know the manufacturer and model of my table?
No. Helpful are photos of the whole table, the substructure, the pockets and any nameplate. From these you can often deduce the construction type.
Can I combine several services in one request?
Yes. For a relocation, for example, you can request transport, reassembly, new cloth and cushion rubbers together.
Who decides which works are technically necessary?
The provider reviews the details and explains in the quote which steps are necessary or optional. If the damage is unclear, an on-site inspection may be required.
Are material costs shown separately?
A transparent quote should clearly distinguish labour, travel, materials and any additional costs.
Can a price be binding based on photos alone?
For clearly defined standard services this is often possible. Hidden damage, difficult access or unknown constructions may, however, require an adjustment.
Is the platform itself the executing tradesman?
Poolplayer forwards structured enquiries to suitable providers. The specific contract for execution is concluded with the selected provider.
Get started now
Describe your request – we will guide you through the enquiry
Select the appropriate service, add table details and photos, and receive comparable quotes based on this information.
